OVERVIEW

Established in 2003, ABSTRACT CONNECTION LLC started its business by executing blasting, priming & coating jobs. ABSTRACT�s strong focus on quality resulted in a satisfied and loyal customer base spread across the UAE, from where ABSTRACT�s growth has been sure and steady.

As part of our expansion, other than our fully covered built-up area of 5000m� and outsized state-of-the-art Blasting & Painting Booths; we have added two more yards with the 7000m� capacity located in Sharjah in order to accommodate large volume of blasting & painting jobs.

ABSTRACT CONNECTION has developed strong technical capabilities and has obtained certification from the Ministry of Civil Defense Dubai & Abu Dhabi, as well as quality system certification including ISO 9001:2008, ISO 14001:2004 & OHSAS 18001:2007.

In our intention to explore more business opportunities, we added new activities in our business. Previously we were only dealing with Abrasive Blasting, Surface Preparation & Protective Coating Works, but now we are proud to have included activities such as: Fireproofing Works (Intumescent & Cementatious), Tank Lining / GRP Lamination Works, Complete Waterproofing System & Insulation Solutions, Traffic Decking System, Epoxy Floor Coating & Painting, Pipeline Coating, Anti Carbonation Coating, Structural Concrete Repair, Screeding & Lightweight Screeding Works and Supply of Specialty Construction Chemicals and Materials.

DIRECTOR�S MESSAGE

With the grace of God, we have relied on the knowledge that success follows hard work and perseverance.

By leveraging the synergies of ABSTRACT CONNECTION�s Business Associates and being a division of the Pansun Groupaided us to accomplish andprovide economically demanding protective coating services in the UAE that boasts of inimitable top quality through excellent service.

The management and employees of ABSTRACT CONNECTION are committed to supply outstanding service and solutions to our clients, because being a service company our primary focus is always our clients, our primary objective being their satisfaction.

We are proud to say that ABSTRACT CONNECTION have established its name in the market and we will continue to strive towards our aim of becoming a leading Protective Coating Contractor in theMiddle East and the GCC.

Babu Lonappan
Managing Director

SERVICES

ABRASIVE BLASTING /
SURFACE PREPARATION

Abrasive blasting is the operation of forcibly propelling a stream of abrasive material against a surface under high pressure to smooth a rough surface, roughen a smooth surface, shape a surface, or remove surface contaminants.There are numerous generic terms for this application usually related to the abrasive media

More

PROTECTIVE /
INDUSTRIAL COATING

An industrial coating is a paint or coating defined by its protective, rather than its aesthetic properties, although it can provide both.The most common use of protective coatings is for corrosion control of steel structures such as offshore platforms, bridges and underground pipelines.

More

FIREPROOFING

Fireproofing, a passive fire protection measure, refers to the act of making materials or structures more resistant to fire, or material for use in making anything fire-proof, or the act of applying such materials. Applying a certification listed fireproofing system to certain structures allows these to have a fire-resistance rating.

More

EPOXY FLOOR COATING &
PAINTING

An epoxy coating is the use of epoxy compounds as coatings or paints. It is generally two parts, which are mixed prior to application and consist of an epoxy resin that is cross-linked with a co-reactant or hardener.In new buildings safety and appearance are of foremost importance.

More

PIPELINE COATING

The application and maintenance of anticorrosion protection is one of the most important aspects affecting pipe manufacturing, laying and operation of pipelines. The two essential components of pipeline protection are: Anticorrosion Coatings and Cathodic Protection. Both are vital to ensuring the long life

More

WATERPROOFING &
INSULATION SOLUTIONS

Regardless of the structure type, choosing appropriate waterproofing solutions and techniques requires an evaluation of factors, such as cause/effect relationships, useful life, constructability, environment, aesthetics, and the overall cost-benefits of the alternatives.

More

ANTI CARBONATION COATING

A major factor in concrete decay is carbonation, caused by Carbon Dioxide (CO2) in the atmosphere reducing the alkalinity of concrete. This in turn results in reinforcing steel becoming susceptible to attack by water and oxygen, causing corrosion of the steel and eventually spalling of the concrete.Sulphates from vehicle exhausts

More

TRAFFIC DECK SYSTEM

The Traffic Deck System offers the ultimate protection to concrete floors subject to the long-term stresses produced by the constant wear of vehicular traffic onto a coating system. A combination of systems can be produced using the various products within the range to ensure that final protection

More

STRUCTURAL CONCRETE REPAIR

The skills, knowledge, and experience required to repair damaged or deteriorated structures are decidedly different from those required to build new structures. These factors demand a contractor with extensive specialty repair experience and proven quality control and quality assurance programs.

More

SCREEDING WORKS

Screeding a floor is the simple act of applying a well blended mixture of ordinary cement with graded agregates and water to a floor base, in order to form a sturdy sub-floor that is capable of taking on the final floor finish or act as a final wearing surface. Nonetheless, as simple as this process might sound, there is a lot more to screeding

More

TANK LINING & GRP LAMINATION

GRP Lining has diverse applications including Corrosion Resistance, Structural Strengthening and Waterproofing. It can be found in most if not all Water Storage Tanks, Sewerage Tanks, Chemical Storage Tanks, Tank Roof Lining, Manholes, Sewerage Sump Pit, Cooling Towers, Chemical Plants, Fire Fighting Networks, Pipeline Networks,

More

  • HEAD OFFICE & PRODUTION YARD / WORKSHOP,DUBAI - UAE

    Area : 5000 m2

    Head of Branch : Mr. Denny V Babu, Chief Operating Officer

    Established Year : 2003

    Tel : +971 4 3417044    Fax : +971 4 3417045

    Postal & Business Address: P.O. Box 38094, Plot # 368-689, Al Quoz Industrial Area 3

    Workshop Address : Plot # 368-154, Al Quoz Industrial Area 3

    Nature of Business : Surface Preparation & Protective Coating

    Infrastructure : Blasting Booth, Painting Booth

    PRODUCTION YARD / WORKSHOP, SHARJAH - UAE

    Area : 7000 m2

    Head of Branch : Mr. Anil Jose, Operations Manager

    Established Year : 2007

    Tel : +971 6 5311617   Fax : +971 6 5311207

    Business / Workshop Address : P.O.Box 43756,

    Sajja Industrial Area

    Postal Address : P.O. Box 43828, Plot # 368-689,

    Al Quoz - Industrial Area 3, Dubai, UAE

    Nature of Business : Blasting & Painting

    BRANCH OFFICE, ABU DHABI - UAE

    Head of Branch : Mr. Roland C Gargarita, Technical Sales Manager

    Established Year : 2010

    Tel : +971 2 6585525

    Fax : +971 2 6585655

    Business Address : P.O. Box 8601, Office #002,

    Al Tawam Tower - 1, Khalifa Street, Near ADNIC

    Postal Address : P.O. Box 38094, Plot # 368-689, Al Quoz -

    Postal Address : P.O. Box 43828, Plot # 368-689,

    Industrial Area 3, Dubai, UAE

    PRODUCTION YARD / WORKSHOP, SHARJAH - UAE

    Area : 7000 m2

    Head of Branch : Mr. Anil Jose, Operations Manager

    Established Year : 2006

    Tel : +971 6 8131388

    Business / Workshop Address : P.O. Box 43828, Sajja Industrial Area

    Postal Address : P.O. Box 38094, Plot # 368-689,

    Al Quoz - Industrial Area 3, Dubai, UAE

    Nature of Business Painting

    BRANCHES &
    INFRASTRUCTURE
  • LIST OF EQUIPMENTS

    1 Air Compressors (900 CFM) 10 Nos

    2 Air Compressors (750 CFM) 10 Nos

    3 Air Compressors (350 CFM) 05 Nos

    4 Air Compressors (250 CFM) 05 Nos

    5 Blasting Pots 30 Nos

    6 Airless Spray Units 25 Nos

    7 Conventional Spray Units 10 Nos

    8 Electrostatic Paint Machine 02 Nos

    9 Air Assisted Painting System 05 Nos

    10 Diaphragm Pump Unit 04 Nos

    11 Paint Mixing Machine 20 Nos

    12 Extractor Fan 08 Nos

    13 Vaccuam Recovery System 03 Nos

    14 High Pressure Water Jetting 03 Nos

    15 Fire proofing Machine 02 Nos

    QUALITY CONTROL INFORMATION

    QC representative carries out preparation of daily report`s that include the following.

    1 Compressed Air Cleanliness.

    2 Dry Film Thickness.

    3 Air Temperature.

    4 Humidity.

    5 Dew Point Temperature.

    6 Surface Temperature.

    7 Abrasive Cleanliness.

    8 Degree Of Cleanliness Achieved.

    9 Surface Profile.

    10 Batch Numbers Of Paint Used.

    11 Batch Numbers Of Thinner Used.

    12 Mixing According To Specification.

    QUALITY CONTROL RECORDS

    Register for daily inspection activity RDI

    Register for environment condition REC

    Register for final inspection reports. RFI

    QUALITY CONTROL INSTRUMENTS

    1 Dry film thickness Gauge 10 Nos

    2 Wet film thickness Gauge 25 Nos

    3 Whirling Hygrometer 08 Nos

    4 Metal thermo meter 08 Nos

    5 Surface Profile Comparator 05 Nos

    6 Needle Gauge 04 Nos

    7 Dew point Calculator 08 Nos

    8 Low Voltage pin hole detector 02 Nos

    9 Salt Determination Kit 02 Nos

    INSRTUMENT DETAILS

    Whirling Hygrometer

    Dew point Calculator

    Visual Standards of Cleanliness -Photos

    Test X Tape (Press-O-Film)

    Spring Micro Meter

    Needle Gauge

    Salt determination kit

    Elcometer Temp. Gauge

    Elecometer Wet Film Gauge

    Elecometer D.F.T Gauge

    Holyday detector

    FIELD OF USE

    Environmental Study

    Environmental Study

    Surface Cleanliness

    Surface roughness REPLICA TAPE

    Normal Profile Height

    Pressure mesurement

    Salt contamination

    Metal Temperature

    Wet film thickness Measurement

    Dry film thickness Measurement

    Pinhole detection

    CHARACTERISTICS

    Dry Bulb Temperature & Wet bulb Temperature

    Dew point & Relative Humidity

    Swedish Stds, SSPC Stds

    Coarse, X- Coarse

    Microns

    In bar

    Salt level Mg/m2

    Steel Temperature

    WFT In Microns

    DFT In Microns

  • In Abstract Connection
    team you will not encounter experts and work force with years of experience, but you will meet appealing people in each activity from different nations.

    LIST OF TECHNICAL STAFF

    Project Engineers
    Site Supervisors
    Site Foremen
    Abrasive Blasters
    Airless Spray Painters
    Waterproofing Torchers
    Fireproofing Sprayers
    Waterproofing Technicians
    Semi-skilled Workers
    Drivers

  • Project List

    SURFACE PREPARATION ABRASIVE BLASTING, PROTECTIVE COATING, PIPELINE & FLOOR COATING
      Projects Nature of work Contractor
    1 aujan warehouse, dubai investment park , dubai, uae ABRASIVE BLASTING & PRIMING works DUPHILL technical services
    2 SAADIyat beach villas protective coating works aljaber building llc
    3 29 boulevard downtown dubai development, plot 55, 56 & 57 protective coating works al futtaim carillion
    4 burj dubai development , plot 58, 59 protective coating works al futtaim carillion
    5 HABSHAN PIPING SPOOLS protective coating works ABJ INDUSTRIES
    6 AL MUNEERA Project protective coating works J & H EMIRates llc
    7 Emirates Aluminium smelter complex FIELD ERECTED tANKS BLASTING – pAINTING INTERNAL AND EXTERNAL area AL JABER PRECISION ENGINEERING LLC
    8 oil storage tANK REFURBISHMENT tANK CLEANING & INTERNAL coating of storage tanks GULF REFINEry co./ iso octane company jebel ali
    9 oil storage tANK REFURBISHMENT tANK CLEANING & INTERNAL coating of storage tanks STAR ENERGY OIL TANKING
    10 SHEIKH ZAYED BRIDGE FOR ABU DHABI ISLAND BLASTING & PAINTING OF ARCH ELEMENT – INTERNAL & EXTERNAL ARCHIRODON CONSTRUCTION (OVERSEAS) CO.SA
    11 CMS BOAT – 35 MTR. BLASTING & PAINTING OF CASPIAN STEEL BOAT AS PER DNV CLASS RULE SPECIFICATION NICO CRAFT LLC
    12 FLAT TOP BARGE BLASTING & PAINTING OF EXTERNAL AND INTERNAL SURFACE ADYARD ABU DHABI LLC
    13 MILITARY AIR BASE - STORAGE FACILITY FIELD ERECTED TANKS BLASTING – PAINTING INTERNAL & EXTERNAL AREAS ARTSON ENGINEERING
    14 COOLING TOWER STORAGE TANK DIP DUBAI FIELD ERECTED TANKS BLASTING - PAINTING INTERNAL & EXTERNAL AREAS AL ARRAB ELECTRO O MECHANICAL ENGINEERING
    15 WORKERS VILLAGE - MUSSAFAH ABU DHABI SURFACE PAINTING OF PIPE LINES & STRUCTURES AMANA PIPE LINE CONSTRUCTION
    16 AL BATTEM SURFACE TREATMENT FOR TUBULAR PILES BOTH ABOVE WATER LINE & BELOW WATER LINE OVERSEAS AST COMPANY LLC
    17 DIBVER - FUJAIRAH CEMENT FACTORY BLASTING & PAINTING ATS ENGINEERING ESTABLISHMENT
    18 LEIGHTON STEALTH RETROFIT 2 AD BLASTING & PAINTING OF FRESH WATER TANK LEIGHTON CONTRACTORS (SINGAPORE) PTE LTD
  • Project List

    FIREPROOFING (INTUSMESCENT & CEMENTITIOUS)
      Projects Nature of work Contractor
    1 ALIAN CENTRALISED WAREHOUSE INTUSMESCENT FIRE PROOFING WORKS SAIF BIB DARWISH
    2 LOYD'S OFFICE, DIFC, DUBAI, UAE CEMENTITIOUS FIRE PROOFING WORKS INTERIOR SERVICE GROUP
    3 CRANLEIGH SCHOOL ABU DHABI UAE INTUSMESCENT FIRE PROOFING WORKS TAFSEER CONTRACTING & GENERAL MAINTENANCE CO.LLC
    4 F1 PADDOCK CLUB EXTENTION, ABUDHAI UAE INTUSMESCENT FIRE PROOFING WORKS INTERIOR SERVICE GROUP
    5 AL SERKAL AVENUE, AL QUOZ , DUBAI UAE INTUSMESCENT FIRE PROOFING WORKS UNICOAT CONTRACTING
    6 DME@DIFC DUBAI, UAE CEMENTITIOUS FIRE PROOFING WORKS INTERIOR SERVICE GROUP
    7 REFURBISHMENT of trilogy night club INTUSMESCENT FIRE PROOFING WORKS ambb interior
    8 abu dhabi international airport CEMENTITIOUS / INTUSMESCENT FIRE PROOFING WORKS alec
    9 cmw-10009-c004 - sweihan airbase INTUSMESCENT FIRE PROOFING WORKS trust construction
    10 bus gate building and tpse building @ abu dhabi international airport CEMENTITIOUS / INTUSMESCENT FIRE PROOFING WORKS taylor woodrow fibrex jv
    WATERPROOFING
      Projects Nature of work Contractor
    1 EMIRATI HOUSING DEVELOPMENT - JEBEL HAFEET ALAIN SUBSTRUCTURE WATER PROOFING WORKS TROJAN GENERAL CONTRACTING
    2 PALM JUMEIRAH GOLDEN MILE 3 CONSTRUCTION OF COMMERCIAL AND RESIDENTIAL BUILDING DUBAI SUBSTRUCTURE WATER PROOFING WORKS TROJAN GENERAL CONTRACTING
    3 AL QURM DESAX, REEM ISLAND, ABUDABI, UAE SUBSTRUCTURE WATER PROOFING WORKS CONTROL CONTRACTING AND TRADING COMPANY
    4 SHINRYO DISTRICT COOLING PLANT, ABUDABI AIRPORT SUBSTRUCTURE WATER PROOFING & ROOFING WORK ALTAYER STOCKS LLC

Project Gallery

AUJAN WAREHOUSE - Dubai Investment Park, Dubai, UAE

AADIYAT BEACH VILLAS

DEWA � NAD AL SHIBA EXPANSION

VVIP TERMIANL - Abu Dhabi International Airport

AL AIN CENTRALIZED WAREHOUSE

F1 PADDOCK CLUB EXTENSION - Abu Dhabi,UAE

AL SERKAL AVENUE - Al Quoz, Dubai, UAE

DME - DIFC, Dubai, UAE

SHARJAH BOTANICAL GARDEN

DUBAI INTERNATIONAL AIRPORT

AL QURM DESAX, REEM ISLAND - Abu Dhabi, UAE

SHINRYO DISTRICT COOLING PLANT - Abu Dhabi Airport, UAE

contact

Enquiry Form

Address & Location Map

DUBAI - UAE

ABSTRACT CONNECTION
LLC

Head Office
P. O. Box 38094,
Plot #368-689,
Al Quoz Industrial Area 3.
Tel: +971 4 3417044
Fax: +971 4 3417045

Workshop / Yard
Plot # 368-154,
Al Quoz Industrial Area 3.

Google - Location Map

ABU DHABI - UAE

ABSTRACT CONNECTION CONTRACTING LLC

Branch Office
P. O. Box 8601, Office #002, Al Tawam Tower-1,
Khalifa Street,
Near ADNIC.
Tel: +971 2 6585525
Fax: +971 2 6585655

Google - Location Map

SHARJAH - UAE

ABSTRACT CONNECTION SAND BLASTING CLEANING

Workshop / Yard
P. O. Box 43828,
Sajja Industrial Area.
Tel: +971 6 5311617
Fax: +971 6 5311207

Google - Location Map

SHARJAH - UAE

ABSTRACT CONNECTION TECH CONT.

Workshop / Yard
P. O. Box 43828,
Sajja Industrial Area.
Tel: +971 6 8131388

Google - Location Map

Crafted By Corptech